Strymon Deco roundup
Strymon Deco: A Complete Buyer's Guide
V2 or original? How to power it correctly? Where does it go in the chain? Here is what to know before you buy.
Buying a Strymon Deco raises one question immediately: V2 or original? They share the same fundamental architecture, but V2 adds enough practical features that the decision depends on how you intend to use it. This guide works through the practical considerations — not just the headline feature list, but the things that will actually matter once you are using the pedal regularly.
V2 or Original?
The original Deco is a closed circuit: what you see on the front panel is what you have. The V2 opens this up considerably. The additions are a Tone control on the Tape Saturation side (the most immediately useful change for general use), the Cassette voicing on the tape section, full MIDI support with up to 300 presets, USB-C for firmware updates, and an externally accessible mono/stereo input switch.
If you are playing live and need to recall specific settings for different songs, V2's preset support matters significantly. If you use the pedal as a straightforward always-on saturation tool in a fixed setting, the original does the same job for less money on the used market. The core tape sound is the same.
Pricing and the Used Market
The V2 is Strymon's current production model and priced accordingly — reviews have referenced approximately £359 as a UK street price, though actual prices vary by retailer and time. Original Deco units appear on the used market at lower prices and in good condition represent strong value if you do not need MIDI or Cassette mode. When buying used, check that the slide switches move cleanly, that both footswitches click correctly and that the power connector is not damaged.
Power: What You Need to Know
The Strymon Deco requires a regulated 9V DC center-negative supply with a minimum of approximately 300 mA of available current. This is higher than many standard compact pedals. A 9V supply rated for 100 mA is not sufficient — the pedal will not operate correctly or will introduce noise. Strymon's own Zuma and Ojai power supplies are designed to handle this. Any isolated, correctly rated supply from another manufacturer will also work if the voltage, polarity and current capacity are correct.
Mono and Stereo Operation
The Strymon Deco V2 supports both mono and stereo operation. In stereo, the Doubletracker can produce a wider, more spacious sound with the two deck signals spread across the outputs. The mono/stereo input switch on V2 is externally accessible, which makes switching between rigs more practical than on the original. When using stereo, pay attention to how phase-dependent effects like flanging behave when the signal is summed to mono — flanging sounds can change significantly or cancel out.
Signal Chain Position
The most common placement is between the guitar and the amplifier's input, either as an always-on front end or as a switchable effect. In this position, the Tape Saturation section works as a front-end signal conditioner and the Doubletracker affects the signal before the amplifier responds to it. In an effects loop, the pedal operates more cleanly and with less amp interaction — better for stereo operation and for keeping the amp's distortion character separate from the pedal's modulation.
What the Deco Is Not
It is not a dedicated tape-echo pedal. If your primary need is a comprehensive tape-echo workstation with multiple head selections, long echo times or complex feedback paths, Strymon's El Capistan or Volante are the relevant options. Deco's maximum lag time of approximately 500 ms covers slapback and modest tape echo, but that is not its primary identity. The central value proposition is tape coloration combined with doubling and modulation effects — in a compact format.
The Bottom Line
V2 for live use, presets and the Tone control. Original for a fixed-setting studio or home-studio application at a lower price. Either way, make sure your power supply is capable of meeting the current demand. For a thorough explanation of what the pedal does and how each section behaves, see our Strymon Deco overview.
Comments